D-Link xStack DGS-3120 Series Cli Reference Manual page 629

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
disable - Specify that the MLD state will be disabled.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the MLD on the IP interface "System":
DGS-3120-24TC:admin#config mld ipif System version 1 state enable
Command: config mld ipif System version 1 state enable
Success.
DGS-3120-24TC:admin#
61-2 show mld
Description
This command is used to display the MLD configurations on the switch.
Format
show mld {ipif <ipif_name 12>}
Parameters
ipif - (Optional) Specify the IP interface name.
<ipif_name 12> - Enter the IP interface name.
Restrictions
None.
Example
To display the MLD configurations on all interfaces::
624