D-Link xStack DGS-3120 Series Cli Reference Manual page 349

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Trap State: Enabled
Log State: Enabled
Permit Source Address Table:
Source IP Address
---------------------------------------
2200::5
Total Entries:1
DGS-3120-24TC:admin#
27-10 delete filter dhcpv6_server permit sip
Description
This command is used to delete a filter DHCPv6 server permit entry.
Format
delete filter dhcpv6_server permit sip <ipv6addr>
Parameters
<ipv6addr> - Enter the source IPv6 address of the entry here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete permit entry from the filter DHCPv6 server forward list:
DGS-3120-24TC:admin#delete filter dhcpv6_server permit sip 2200::4
Command: delete filter dhcpv6_server permit sip 2200::4
Success.
DGS-3120-24TC:admin#
27-11 create filter icmpv6_ra_all_node permit sip
Description
This command is used to create a filter ICMPv6 RA All-nodes permit entry.
Format
create filter icmpv6_ra_all_node permit sip <ipv6addr> ports [<portlist> | all]
Port
---------------
1:5
344