D-Link xStack DGS-3120 Series Cli Reference Manual page 287

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
22-47 debug vrrp show log state (RI Mode Only)
Description
The command is used to display the VRRP debug log state.
Format
debug vrrp show log state
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display the VRRP debug log state:
DGS-3120-24TC:admin#debug vrrp show log state
Command: debug vrrp show log state
VRRP Debug Log State : Enabled
DGS-3120-24TC:admin#
22-48 debug vrrp state (RI Mode Only)
Description
The command is used to enable or disable the VRRP debug state.
Format
debug vrrp state [enable | disable]
Parameters
enable - Specify that the VRRP debug state will be enabled.
disable - Specify that the VRRP debug state will be disabled.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable the VRRP debug state:
282