D-Link xStack DGS-3120 Series Cli Reference Manual page 1079

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Example
To delete all of the control entries for both ingress and egress traffic:
DGS-3120-24TC:admin#delete vlan_counter all
Command: delete vlan_counter all
Success.
DGS-3120-24TC:admin#
117-4 show vlan_counter
Description
This command is used to display the VLANs traffic flow statistics.
Format
show vlan_counter {[vlan <vlan_name> | vlanid <vidlist>]} {[rx | tx]}
Parameters
vlan - (Optional) Specify the VLAN name that will be used for this display.
<vlan_name> - Enter the VLAN name that will be used for this display.
vlanid - (Optional) Specify the VLAN ID that will be used for this display.
<vidlist> - Enter the VLAN ID that will be used for this display.
rx - (Optional) Specify that the control entries for ingress traffic will be displayed.
tx - (Optional) Specify that the control entries for egress traffic will be displayed.
Restrictions
None.
Example
To display the VLAN counter information:
DGS-3120-24TC:admin#show vlan_counter
Command: show vlan_counter
VLAN Frame Type
---- --------------------
-
1 RX Broadcast(Packet)
2 RX Multicast(Packet)
1 TX Broadcast(Packet)
4 TX Unicast(Packet)
CTRL+C ESC q Quit
Ports
---------------------------------------------------
3
3
3
5
SPACE n Next Page p
1074
Previous Page r Refresh