D-Link xStack DGS-3120 Series Cli Reference Manual page 541

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC: show jwac auth_state ports 1:1-1:4
Command: show jwac auth_state ports 1:1-1:4
Pri - Priority. State - A:Authenticated, B:Blocked, -:Authenticating
Time - Aging Time/Idle Time for authenticated entries.
Port MAC Address
----- -------------------- ---- ---- --- ------- --------------- ---------------
1 00-00-00-00-00-01
1 00-00-00-00-00-02
1 00-00-00-00-00-03
1 00-00-00-00-00-04
2 00-00-00-00-00-10(P)
3 00-00-00-00-00-20(P)
3 00-00-00-00-00-21(P)
4 00-00-00-00-00-21(P)
dee:eeff name
Total Authenticating Hosts
Total Authenticated Hosts
Total Blocked Hosts
DGS-3120-24TC:admin#
49-27 config jwac authorization attributes
Description
This command is used to enable or disable acceptation of authorized configuration. When the
authorization is enabled for JWAC's RADIUS, the authorized data assigned by the RADUIS server
will be accepted if the global authorization network is enabled. When the authorization is enabled
for JWAC's local, the authorized data assigned by the local database will be accepted.
Format
config jwac authorization attributes {radius [enable | disable] | local [enable | disable]}(1)
Parameters
radius - If specified to enable, the authorized data assigned by the RADUIS server will be
accepted if the global authorization network is enabled.The default state is enabled.
enable - Specify to enable authorized data assigned by the RADUIS server to be accepted.
disable - Specify to disable authorized data assigned by the RADUIS server from being
accepted.
local - If specified to enable, the authorized data assigned by the local database will be accepted
if the global authorization network is enabled. The default state is enabled.
enable - Specify to enable authorized data assigned by the local database to be accepted.
disable - Specify to disable authorized data assigned by the local database from being
accepted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
State VID Pri Time
A 20 3 1440/30 192.168.101.239 jack
A 1234 - 1440/30 172.18.61.242
B - - -/40
- - - 10
A 1234 - 1440/30 10.10.10.90
- - - 1440/30 10.10.10.131
B - - -/29
A 1234 5 1440/30 3000:2000:3000:aabb:bbcc:ccdd:d
: 2
: 4
: 2
536
IP User Name
tom
172.18.61.243 user
- -
admin
-
172.18.61.133 lina