D-Link xStack DGS-3120 Series Cli Reference Manual page 917

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Parameters
<ipaddr> - Specify the IPv4 address of the TFTP server.
<ipv6addr> - Specify the IPv6 address of the TFTP server.
<domain_name 255> - Enter the domain name of the TFTP server.
src_file - Specify the path name and file name of the TFTP server. It can be a relative path name
or an absolute path name. If path name is not specified, it refers to the TFTP server path.
<path_filename 64> - Enter the source file path. This can be up to 64 characters long.
Restrictions
Only Administrator-level users can issue this command.
Example
To upload a SSH public key file named id_rsa_keys from TFTP server 169.168.10.100 to the
switch:
DGS-3120-24TC:admin# upload ssh client_pub_key 169.168.10.100 dest_file
id_rsa_keys
Command: upload ssh client_pub_key 169.168.10.100 dest_file id_rsa_keys
Connecting to server................... Done.
Upload SSH public key.................. Done.
DGS-3120-24TC:admin#
94-14 config ssh client_pubkey_owner key_id
Description
This command is used to manage the public keys ownership. Once the authorized public keys file
(each line of the file contains one key) is downloaded to the switch, each key will be automatically
assigned an index which starts from one. The administrator can associate the public key with a
user account based on the index.
NOTE: Each time the authorized public keys file is downloaded to the switch, the previous
configuration about the relationship between user account and public key will be reset. The
administrator must re-configure if a public key is intended for a special user account.
Format
config ssh client_pubkey_owner key_id <int 1-8> [add | remove] user <username 15>
Parameters
key_id - Specify the key ID that will be associated with the user account.
<int 1-8> - Enter the key ID used here. This value must be between 1 and 8.
add - Specify to add an association between the key and the user account. When a public key is
associated with a user account, the public key can only be used by that user account. A public
key may be associated with more than one user account, and a user account may associate
with more than one public keys. A public key which has not been associated with any user
account can be used by all users.
remove - Specify to remove the association between the key and the user account.
912