D-Link xStack DGS-3120 Series Cli Reference Manual page 847

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Example
To show scheduling mechanism:
DGS-3120-24TC:admin#show scheduling_mechanism
Command: show scheduling_mechanism
Port Mode
----- ------
1:1 Strict
1:2 Strict
1:3 Strict
1:4 Strict
1:5 Strict
1:6 Strict
1:7 Strict
1:8 Strict
1:9 Strict
1:10 Strict
1:11 Strict
1:12 Strict
1:13 Strict
1:14 Strict
1:15 Strict
1:16 Strict
1:17 Strict
1:18 Strict
1:19 Strict
1:20 Strict
1:21 Strict
1:22 Strict
1:23 Strict
1:24 Strict
DGS-3120-24TC:admin#
84-9 config 802.1p user_priority
Description
This command is used to map the 802.1p user priority of an incoming packet to one of the eight
hardware queues available on the Switch.
Format
config 802.1p user_priority <priority 0-7> <class_id 0-7>
Parameters
<priority 0-7> - The 802.1p user priority you want to associate with the <class_id> (the number
of the hardware queue) with.
<class_id 0-7> - The number of the Switch's hardware priority queue. The switch has 8 hardware
842