D-Link xStack DGS-3120 Series Cli Reference Manual page 720

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin#show ospf host_route
Command: show ospf host_route
OSPF Host Route Settings
Host Address Metric Area ID
--------------- ------ ---------------
10.48.74.122 3
Total Entries : 1
DGS-3120-24TC:admin#
70-14 config ospf router_id
Description
The command is used to configure the router ID for the Switch. Each Switch that is configured to
run OSPF must have a unique router ID.
Format
config ospf router_id <ipaddr>
Parameters
<ipaddr> - Enter the router's IP address here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the router ID for the Switch:
DGS-3120-24TC:admin#config ospf router_id 10.48.74.122
Command: config ospf router_id 10.48.74.122
Success.
DGS-3120-24TC:admin#
70-15 create ospf virtual_link
Description
This command is used to create an OSPF virtual link.
10.1.1.1
715