D-Link xStack DGS-3120 Series Cli Reference Manual page 941

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
97-2 disable surveillance_vlan
Description
This command is used to disable surveillance VLAN globally.
Format
disable surveillance_vlan
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the surveillance VLAN:
DGS-3120-24TC:admin#disable surveillance_vlan
Command: disable surveillance_vlan
Success.
DGS-3120-24TC:admin#
97-3 config surveillance_vlan priority
Description
This command is used to configure the surveillance VLAN priority which is associated with the
surveillance VLAN traffic to distinguish the QoS of the surveillance traffic from the data traffic.
Format
config surveillance_vlan priority <int 0-7>
Parameters
<int 0-7> - Enter the priority of the surveillance VLAN. The range is from 0 to 7. The default
priority is 5.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set the priority of the surveillance VLAN to be 6:
936