D-Link xStack DGS-3120 Series Cli Reference Manual page 274

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Restrictions
Only Administrator-level users can issue this command.
Example
To display all Network LSAs with detail information:
DGS-3120-24TC:admin#debug ospf show detail net_link
Command: debug ospf show detail net_link
OSPF Phase2 NET Link:
===========
AREA 0.0.0.0:
Network LSA:
Link-State ID: 10.90.90.123
Netmask: 255.0.0.0
Advertising Router: 10.90.90.91
LS Age: 109 Seconds
Options: 0x2
.... ...0 = 0 Bit Isn't Set
.... ..1. = E: ExternalRoutingCapability
.... .0.. = MC: NOT Multicast Capable
.... 0... = N/P: NSSA Bit
...0 .... = EA: Not Support Rcv And Fwd EA_LSA
..0. .... = DC: Not Support Handling Of Demand Circuits
.0.. .... = O: O Bit Isn't Set
0... .... = 7 Bit Isn't Set
LS Sequence Number: 0x80000001
Length: 32
Attached Router: 10.90.90.91
Attached Router: 1.1.1.1
Internal Field:
Del_flag: 0x0 I_ref_count: 0
Rxtime: 4 Txtime: 4
Current Time: 112
DGS-3120-24TC:admin#
22-33 debug ospf show detail rt_link (RI Mode Only)
Description
This command is used to display all Router LSAs with detail information.
Format
debug ospf show detail rt_link
Parameters
None.
Seq: 0x80000001
Orgage: 1
269
Csum: 0x4e99