D-Link xStack DGS-3120 Series Cli Reference Manual page 472

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
mac_address - Specify the MAC address.
<macaddr> - Enter the MAC address here.
ports - (Optional) Configure the portlist to apply, if ports are not configured, then it will apply to all
ports.
<portlist> - Specify the list of ports to apply.
all - Specify to apply to all the ports.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure a static IPv6 IMPB entry so that that IPv6 address fe80::240:5ff:fe00:28 is bound to
the MAC address 00-00-00-00-00-11:
DGS-3120-24TC:admin#config address_binding ip_mac ipv6address
fe80::240:5ff:fe00:28 mac_address 00-00-00-00-00-11
Command: config address_binding ip_mac ipv6address FE80::240:5FF:FE00:28
mac_address 00-00-00-00-00-11
Success.
DGS-3120-24TC:admin#
43-5 delete address_binding blocked
Description
This command is used to delete a blocked entry.
Format
delete address_binding blocked [all | vlan_name <vlan_name> mac_address <macaddr>]
Parameters
all - Specify that all the entries the address database that the system has automatically learned
and blocked to be deleted.
vlan_name - Specify the name of the VLAN to which the blocked MAC address belongs.
<vlan_name> - Enter the VLAN name.
mac_address - Specify the MAC address of the entry or the blocked MAC address.
<macaddr> - Enter the MAC address used.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a blocked address:
467