D-Link xStack DGS-3120 Series Cli Reference Manual page 816

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Example
To show the PIM6 neighbors:
DGS-3120-24TC:admin#show pim6 neighbor
Command: show pim6 neighbor
PIM6 Neighbor Address Table
Interface Neighbor Address
-------------- ----------------
System FE80::200:FF:FE26:66D0
n1 FE80::200:FF:FE26:66D1
Total Entries : 2
DGS-3120-24TC:admin#
To show the PIM6 neighbors of interface "n20":
DGS-3120-24TC:admin# show pim6 neighbor ipif n20
Command: show pim6 neighbor ipif n20
Neighbor Info on Interface n20
----------------------------------------------------
Neighbor Address
Neighbor Up Time
Neighbor Expiry Time
Neighbor DR Priority Present
Neighbor DR Priority
Total Entries : 1
DGS-3120-24TC:admin#
81-12 show pim6 mroute
Description
This command is used to display the multicast routing information generated by PIM6.
Format
show pim6 mroute {group <ipv6addr> {source <ipv6addr>}}
Parameters
group - (Optional) Specify the IPv6 multicast group address to be displayed.
<ipv6addr> - Enter the IPv6 address.
source - (Optional) Specify the IPv6 source address to be displayed.
<ipv6addr> - Enter the IPv6 address.
: FE80::11FF:4CD8
: 00:00:50
: 00:01:50
: True
: 1
811