D-Link xStack DGS-3120 Series Cli Reference Manual page 240
Dgs-3120 series layer 3 managed gigabit ethernet switch
Hide thumbs
Also See for xStack DGS-3120 Series:
- Reference manual (509 pages) ,
- Manual (852 pages) ,
- Product manual (339 pages)
Table of Contents
Advertisement
®
xStack
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin#create cpu access_profile profile_id 1 ethernet vlan
source_mac 00-00-00-00-00-01 destination_mac 00-00-00-00-00-02 802.1p
ethernet_type
Command: create cpu access_profile profile_id 1 ethernet vlan source_mac 00-00-
00-00-00-01 destination_mac 00-00-00-00-00-02 802.1p ethernet_type
Success.
DGS-3120-24TC:admin#create cpu access_profile profile_id 2 ip vlan
source_ip_mask 20.0.0.0 destination_ip_mask 10.0.0.0 dscp icmp type code
Command: create cpu access_profile profile_id 2 ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code
Success.
DGS-3120-24TC:admin#
21-2
delete cpu access_profile
Description
This command is used to delete CPU access list rules.
Format
delete cpu access_profile [profile_id <value 1-5> | all]
Parameters
profile_id - Specify the index of access list profile.
<value 1-5> - Enter the profile ID value here. This value must be between 1 and 5.
all – Specify that al the access list profiles will be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete CPU access list rules:
DGS-3120-24TC:admin# delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
DGS-3120-24TC:admin#
21-3
config cpu access_profile
Description
This command is used to configure CPU access list entry.
235
Hide quick links:
Advertisement
Table of Contents
