D-Link xStack DGS-3120 Series Cli Reference Manual page 839

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin# delete vlan_translation ports 1:1-1:4
Command: delete vlan_translation ports 1:1-1:4
Success.
DGS-3120-24TC:admin#
83-10 show vlan_translation
Description
This command is used to display the existing C-VLAN-based VLAN translation rules.
Format
show vlan_translation {[ports <portlist> | cvid <vidlist>]}
Parameters
ports – (Optional) Specify a list of ports to be displayed.
<portlist> - Enter the list of ports to be displayed here.
cvid - (Optional) Specify the rules for the specified CVIDs.
<vidlist> - Enter the CVID value used here.
Restrictions
None.
Example
To show C-VLANs based on VLAN translation rules in the system:
DGS-3120-24TC:admin# show vlan_translation
Command: show vlan_translation
Port CVID
----- --------
1:1 20
1:1 30
Total Entries: 2
DGS-3120-24TC:admin#
SPVID Action
-------- -------
200 Replace
300 Add
834
Priority
---------
-
-