D-Link xStack DGS-3120 Series Cli Reference Manual page 891

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin#show route preference
Command: show route preference
Route Preference Settings
Protocol Preference
---------- ----------
RIP 100
Static 60
Default 1
Local 0
OSPF Intra 80
OSPF Inter 90
OSPF ExtT1 110
OSPF ExtT2 115
DGS-3120-24TC:admin#
89-18 enable ecmp ospf (RI Mode Only)
Description
This command is used to activate the OSPF ECMP function.
Format
enable ecmp ospf
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the OSPF ECMP function:
DGS-3120-24TC:admin#enable ecmp ospf
Command: enable ecmp ospf
Success.
DGS-3120-24TC:admin#
89-19 disable ecmp ospf (RI Mode Only)
Description
This command is used to disable the OSPF ECMP function.
886