D-Link xStack DGS-3120 Series Cli Reference Manual page 540

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
authenticating - (Optional) Specify the state of host to delete.
blocked - (Optional) Specify the state of host to delete.
mac_addr - Delete a specified host with this MAC address.
<macaddr> - Enter the MAC address here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete authentication entries:
DGS-3120-24TC:admin#clear jwac auth_state ports all blocked
Command: clear jwac auth_state ports all blocked
Success.
DGS-3120-24TC:admin#
49-26 show jwac auth_state ports
Description
This command is used to display information for JWAC client hosts.
Format
show jwac auth_state ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a port range to show the JWAC authentication entries.
If no port is specified, the JWAC authentication state will be displayed for all ports.
Restrictions
None.
Example
To display JWAC authentication entries for ports 1:1 to 1:4:
535