D-Link xStack DGS-3120 Series Cli Reference Manual page 990
Dgs-3120 series layer 3 managed gigabit ethernet switch
Hide thumbs
Also See for xStack DGS-3120 Series:
- Reference manual (509 pages) ,
- Manual (852 pages) ,
- Product manual (339 pages)
Table of Contents
Advertisement
®
xStack
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
101-33
config snmp coldstart_traps
Description
This command is used to configure the trap for coldstart event.
Format
config snmp coldstart_traps [enable | disable]
Parameters
enable - Enable the trap of the coldstart event. The default state is enabled.
disable - Disable the trap of the coldstart event.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the trap for coldstart event:
DGS-3120-24TC:admin# config snmp coldstart_traps enable
Command: config snmp coldstart_traps enable
Success.
DGS-3120-24TC:admin#
101-34
config snmp warmstart_traps
Description
This command is used to configure the trap state for warmstart event.
Format
config snmp warmstart_traps [enable | disable]
Parameters
enable - Enable the trap of the warmstart event. The default state is enabled.
disable - Disable the trap of the warmstart event.
Restrictions
Only Administrator-level users can issue this command.
985
Hide quick links:
Advertisement
Table of Contents
