D-Link xStack DGS-3120 Series Cli Reference Manual page 325

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
26-3 show dhcp excluded_address
Description
This command is used to display the groups of IP addresses which are excluded from being a
legal assigned IP address.
Format
show dhcp excluded_address
Parameters
None.
Restrictions
None.
Example
To display the DHCP server excluded addresses:
GS-3120-24TC:admin#show dhcp excluded_address
Command: show dhcp excluded_address
Index Begin Address
----- ------------
1 10.10.10.1
Total Entries: 1
DGS-3120-24TC:admin#
26-4 create dhcp pool
Description
This command is used to create a DHCP pool by specifying a name. After creating a DHCP pool,
use other DHCP pool configuration commands to configure parameters for the pool.
Format
create dhcp pool <pool_name 12>
Parameters
<pool_name 12> - Specify the name of the DHCP pool.
End Address
------------
10.10.10.10
320