Disable Sntp; Config Time - D-Link xStack DGS-3120 Series Cli Reference Manual
Dgs-3120 series layer 3 managed gigabit ethernet switch
Hide thumbs
Also See for xStack DGS-3120 Series:
- Reference manual (509 pages) ,
- Manual (852 pages) ,
- Product manual (339 pages)
Table of Contents
Advertisement
®
xStack
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin# enable sntp
Command: enable sntp
Success.
DGS-3120-24TC:admin#
110-5 disable sntp
Description
This command is used to turn off SNTP support.
Format
disable sntp
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable SNTP:
DGS-3120-24TC:admin# disable sntp
Command: disable sntp
Success.
DGS-3120-24TC:admin#
110-6 config time
Description
This command is used to configure time and date settings of the device.
Format
config time <date ddmthyyyy> <time hh:mm:ss>
Parameters
<date ddmthyyyy> - Specify the system clock date. An example would look like this:
'30jun2010'.
<time hh:mm:ss> - Specify the system clock time. An example would look like this: '12:00:00'.
1038
Hide quick links:
Advertisement
Table of Contents
