D-Link xStack DGS-3120 Series Cli Reference Manual page 887

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin#show route redistribute dst ospf
Command: show route redistribute dst ospf
Route Redistribution Settings
Source Destination
Protocol Protocol
-------- ------------
RIP OSPF
Total Entries : 1
DGS-3120-24TC:admin#
89-13 show route redistribute dst rip (RI Mode Only)
Description
This command is used to the redistribution with the target protocol RIP.
Format
show route redistribute dst rip {src [local | static | ospf]}
Parameters
src - (Optional) Specify the source protocol.
local - Display the redistribution with the source local.
static - Display the redistribution with the source static.
rip - Display the redistribution with the source protocol RIP.
Restrictions
None.
Example
To display the redistribution with the target protocol RIP:
DGS-3120-24TC:admin#show route redistribute dst rip
Command: show route redistribute dst rip
Route Redistribution Settings
Source Destination
Protocol Protocol
-------- ------------
OSPF RIP
Total Entries : 1
DGS-3120-24TC:admin#
Type Metric
-------- ------
Type-1 2
Type Metric
-------- ------
Internal 2
882
RouteMapName
------------
N/A
RouteMapName
------------
N/A