D-Link xStack DGS-3120 Series Cli Reference Manual page 885

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
89-10 delete route redistribute dst rip src (RI Mode Only)
Description
This command is used to stop redistribution of routes from one source protocol to RIP.
Format
delete route redistribute dst rip src [local | static | ospf]
Parameters
local - Specify the source protocol as local.
static - Specify the source protocol as static.
ospf - Specify the source protocol as OSPF.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete route redistribution settings:
DGS-3120-24TC:admin#delete route redistribute dst rip src local
Command: delete route redistribute dst rip src local
Success.
DGS-3120-24TC:admin#
89-11 show route redistribute (RI Mode Only)
Description
This command is used to display the route redistribution settings on the Switch.
Format
show route redistribute
Parameters
None.
Restrictions
None.
Example
To display the route redistribution settings:
880