D-Link xStack DGS-3120 Series Cli Reference Manual page 876

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the RIPng route redistribution:
DGS-3120-24TC:admin#config ipv6route redistribute dst ripng src local metric 6
Command: config ipv6route redistribute dst ripng src local metric 6
Success.
DGS-3120-24TC:admin#
88-8 delete ipv6route redistribute dst ripng src
Description
This command is used to remove RIPng route redistribution to stop importing routes from other
routing domain into RIPng domain.
Format
delete ipv6route redistribute dst ripng src [local | static | ospfv3]
Parameters
local - Specify not to redistribute local routes into RIPng.
static - Specify not to redistribute static routes into RIPng.
ospfv3 - Specify not to redistribute OSPFv3 routes into RIPng.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To remove the RIPng route redistribution:
DGS-3120-24TC:admin#delete ipv6route redistribute dst ripng src local
Command: delete ipv6route redistribute dst ripng src local
Success.
DGS-3120-24TC:admin#
871