D-Link xStack DGS-3120 Series Cli Reference Manual page 883

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Example
To delete route redistribution settings:
DGS-3120-24TC:admin#delete route redistribute dst ospf src local
Command: delete route redistribute dst ospf src local
Success.
DGS-3120-24TC:admin#
89-8 create route redistribute dst rip src (RI Mode Only)
Description
This command is used to redistribute routing information from other routing protocols into RIP.
When the metric is specified as 0, the metric in the original route will become the metric of the
redistributing RIP routes transparently. If the metric of the original routes is greater than 16, the
route will be not redistributed.
Format
create route redistribute dst rip src [local | static | ospf [all | internal | external | type_1 |
type_2 | inter+e1 | inter+e2]] {metric <value 0-16> | route_map <map_name 16>}
Parameters
local - Redistribute local routes into RIP.
static - Redistribute static routes into RIP.
ospf - Redistribute OSPF routes into RIP.
all - Redistribute both OSPF AS-internal and OSPF AS-external routes into RIP.
internal - Only redistribute OSPF AS-internal routes.
external - Only redistribute OSPF AS-external routes, including type-1 and type-2 routes.
type_1 - Only redistribute OSPF AS-internal type-1 routes.
type_2 - Only redistribute OSPF AS-internal type-2 routes.
inter+e1 - Only redistribute OSPF AS-internal type-1 and OSPF AS-internal routes.
inter+e2 - Only redistribute OSPF AS-internal type-2 and OSPF AS-internal routes.
metric - (Optional) Specify the RIP route metric value for the redistributed routes.
<value 0-16> - Enter the value from 0 to 16. The default value is 0.
route_map - (Optional) Specify the route map for the redistributed routes.
<map_name 16> - Enter the name of the route map.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add route redistribution settings:
878