D-Link xStack DGS-3120 Series Cli Reference Manual page 676

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Format
create [igmp_snooping | mld_snooping] multicast_vlan <vlan_name 32> <vlanid 2-4094>
{remap_priority [<value 0-7> | none] {replace_priority}}
Parameters
igmp_snooping - Specify to configure VLAN for IGMP snooping.
mld_snooping - Specify to configure VLAN for MLD snooping.
multicast_vlan - The name of the multicast VLAN to be created. Each multicast VLAN is given a
name that can be up to 32 characters.
<vlan_name 32> - Enter the VLAN here. The VLAN name can be up to 32 characters long.
<vlanid 2-4094> - The VLAN ID of the multicast VLAN to be created. This value must be
between 2 and 4094.
remap_priority - (Optional) The remap priority (0 to 7) to be associated with the data traffic to be
forwarded on the multicast VLAN. If none is specified, the packet's original priority will be
used. The default setting is none.
<value 0-7> - Enter the remap priority value here. This value must be between 0 and 7.
none - Specify that the remap priority value will be set to none.
replace_priority - (Optional) Specify that packet's priority will be changed by the Switch, based
on the remap priority. This flag will only take effect when the remap priority is set.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create an IGMP snooping multicast VLAN with the VLAN name mv1 and the VID 2:
DGS-3120-24TC:admin#
Command: create igmp_snoop multicast_vlan mv1 2
Success.
DGS-3120-24TC:admin#
66-2 config igmp_snooping multicast_vlan
Description
This command is used to add member ports and source ports to a list of multicast VLAN member
ports. Member ports automatically become untagged members of the multicast VLAN and source
ports automatically become tagged members of the multicast VLAN. However, member ports of
one multicast VLAN are allowed to overlap with member ports on a different multicast VLAN.
A multicast VLAN must first be created using the create igmp_snooping multicast_vlan command
before the multicast VLAN can be configured.
Format
config igmp_snooping multicast_vlan <vlan_name 32> {[add | delete] [member_port
<portlist> | [source_port <portlist> | untag_source_port <portlist>] | tag_member_port
<portlist>] | state [enable | disable] | replace_source_ip [<ipaddr> | none] | remap_priority
[<value 0-7> | none] { replace_priority} | cvid [<vlanid 1-4094> | null]}(1)
create igmp_snoop multicast_vlan mv1 2
671