®
xStack
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin#show ospfv3 neighbor
Command: show ospfv3 neighbor
Router ID of
Interface
Neighbor
Name
--------------- ------------ -------- -------------
10.10.10.10
System
20.20.20.20
ip1
Total Entries: 2
DGS-3120-24TC:admin#
71-16 show ospfv3 virtual_neighbor
Description
This command is used to display OSPFv3 virtual neighbor information.
Format
show ospfv3 virtual_neighbor {<area_id> <neighbor_id>}
Parameters
<area_id> - (Optional) Specify the transit area where the virtual neighbor is built.
<neighbor_id> - (Optional) Specify the virtural neighbor router ID.
Restrictions
None.
Example
To display OSPFv3 virtual neighbor:
DGS-3120-24TC:admin#show ospfv3 virtual_neighbor
Command: show ospfv3 virtual_neighbor
Transit
Router ID of
Area ID
Virtual Neighbor State
--------------- ---------------- ----------------
1.1.1.1
30.30.30.30
Total Entries: 1
DGS-3120-24TC:admin#
71-17 create ospfv3 virtual_link
Description
This command is used to create an OSPFv3 virtual link
Neighbor Neighbor
Priority State
1
Full
10
Full
Virtual Neighbor
Full
737