D-Link xStack DGS-3120 Series Cli Reference Manual page 348

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Format
config filter dhcpv6_server trap [enable | disable]
Parameters
enable - Specify that the trap for the filter DHCPv6 server will be enabled. The trap for filter
DHCPv6 server will be sent out.
disable - Specify that the trap for the filter DHCPv6 server will be disabled.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the filter DHCPv6 server trap state:
DGS-3120-24TC:admin#config filter dhcpv6_server trap enable
Command: config filter dhcpv6_server trap enable
Success.
DGS-3120-24TC:admin#
27-9 show filter dhcpv6_server
Description
This command is used to display the filter DHCPv6 server information.
Format
show filter dhcpv6_server
Parameters
None.
Restrictions
None.
Example
To display filter DHCPv6 server information:
DGS-3120-24TC:admin#show filter dhcpv6_server
Command: show filter dhcpv6_server
Enabled ports:1:1-1:8
343