D-Link xStack DGS-3120 Series Cli Reference Manual page 915

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin#show ssh server
Command: show ssh server
The SSH Server Configuration
Maximum Session
Connection Timeout
Authentication Fail Attempts : 2
Rekey Timeout
TCP Port Number
Bypass Login Screen State
DGS-3120-24TC:admin#
94-11 config ssh publickey bypass_login_screen state
Description
This command is used to enable or disable bypassing login screen which is used to avoid a
secondary username/password authentication for users using SSH public key authentication.
Format
config ssh publickey bypass_login_screen state [enable | disable]
Parameters
enable - Specify to bypass the username/password login screen to avoid a secondary
authentication after using SSH public key authentication. If this method is specified, the login
user using SSH public key authentication can execute command directly with the initial
privilege level of the login user.
disable - Specify to need a secondary username/password authentication after using SSH public
key authentication. If this method is specified, the login user using SSH public key
authentication must pass username/password authentication before execution shell is
obtained. The initial privilege level depends on the secondary username/password
authentication.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the secondary username/password authentication for users using SSH public key
authentication:
DGS-3120-24TC:admin#config ssh publickey bypass_login_screen state disable
Command: config ssh publickey bypass_login_screen state disable
Success.
DGS-3120-24TC:admin#
: 8
: 120
: Never
: 22
: Disabled
910