D-Link xStack DGS-3120 Series Cli Reference Manual page 375

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin#show dvmrp neighbor
Command: show dvmrp neighbor
DVMRP Neighbor Address Table
Interface Neighbor Address
--------------- ----------------
System 10.48.74.123
Total Entries : 1
DGS-3120-24TC:admin#
30-6 show dvmrp nexthop
Description
This command is used to display the DVMRP routing next hop table.
Format
show dvmrp nexthop {ipaddress <network_address> | ipif <ipif_name 12>}
Parameters
ipaddress - (Optional) Specify the IP address and netmask of the destination used.
<network_address> - Enter the IP address and netmask of the destination used here.
ipif - (Optional) Specify the IP interface name used for the display.
<ipif_name 12> - Enter the IP interface name used for the display here. This name can be up
to 12 characters long.
If no parameter is specified, the system will display all the DVMRP routing next hop tables.
Restrictions
None.
Example
To display DVMRP routing next hop table:
Generation ID Expire Time
------------- -----------
86 32
370