D-Link xStack DGS-3120 Series Cli Reference Manual page 1065

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin#config udp_helper udp_port add 55
Command: config udp_helper udp_port add 55
Success.
DGS-3120-24TC:admin#
115-4 config udp_helper udp_port delete
Description
This command is used to delete a UDP port for UDP helper function on the Switch.
Format
config udp_helper udp_port delete [time | tacacs | dns | tftp | netbios-ns | netbios-ds |
<port_number 0-65535>]
Parameters
time – Time service. The UDP port is 37.
tacacs - Terminal Access Controller Access Control System service. The UDP port number is 49.
dns - Domain Naming System. The UDP port number is 53.
tftp - Trivial File Transfer Protocol. The UDP port number is 69.
netbios-ns - NetBIOS Name Server. The UDP port number is 137.
netbios-ds - NetBIOS Datagram Server. The UDP port number is 138.
<port_number 0-65535> - Specify other UDP ports, except the port 67 and 68. These two ports
are reserved for DHCP function.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a UDP port:
dmin#config udp_helper udp_port delete 55
Command: config udp_helper udp_port delete 55
Success.
DGS-3120-24TC:admin#
115-5 config udp_helper add ipif
Description
This command is used to add a UDP helper server address for specific interface of the Switch.
Format
config udp_helper add ipif <ipif_name 12> <ipaddr>
1060