D-Link xStack DGS-3120 Series Cli Reference Manual page 1074

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin#show vrrp
Command: show vrrp
Global VRRP
Non-owner Response Ping: Disabled
Interface Name
Authentication Type
Authentication Data
VRID
Virtual IP Address
Virtual MAC Address
Virtual Router State
State
Priority
Master IP Address
Critical IP Address
Checking Critical IP
Advertisement Interval : 1 Sec(s)
Preempt Mode
Virtual Router Up Time : 621430 centi-secs
Total Entries: 1
DGS-3120-24TC:admin#
116-8 config vrrp trap state
Description
This command is used to enable or disable the VRRP trap state.
Format
config vrrp trap state [enable | disable]
Parameters
enable – Specify to enable the VRRP trap state.
disable – Specify to disable the VRRP trap state.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
This example shows how to enable the VRRP trap state.
: Enabled
: System
: Simple Text Password
: 12345678
: 1
: 10.90.90.91
: 00-00-5E-00-01-01
: Master
: Enabled
: 100
: 10.90.90.90
: 0.0.0.0
: Disabled
: True
1069