®
xStack
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
52-7
show lacp_port
Description
This command is used to display the current mode of LACP of the ports.
Format
show lacp_port <portlist>
Parameters
lacp_port - Specified a range of ports to be configured.
<portlist> - Enter the list of ports used for this configuration here.
If no parameter specified, the system will display current LACP and all port status.
Restrictions
None.
Example
To show port LACP mode:
DGS-3120-24TC:admin#show lacp_port
Command: show lacp_port
Port
Activity
-----
--------
1:1
Passive
1:2
Passive
1:3
Passive
1:4
Passive
1:5
Passive
1:6
Passive
1:7
Passive
1:8
Passive
1:9
Passive
1:10
Passive
1:11
Passive
1:12
Passive
1:13
Passive
1:14
Passive
1:15
Passive
1:16
Passive
1:17
Passive
1:18
Passive
CTRL+C ESC q
Quit
SPACE n
Next Page
ENTER
553
Next Entry
a
All