D-Link xStack DGS-3120 Series Cli Reference Manual page 736

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Example
To configure OSPFv3 area:
DGS-3120-24TC:admin#config ospfv3 area 2.2.2.2 type stub
Command: config ospfv3 area 2.2.2.2 type stub
Success.
DGS-3120-24TC:admin#
71-8 delete ospfv3 area
Description
This command is used to delete an OSPFv3 area. The backbone area (0.0.0.0) can not be deleted.
Format
delete ospfv3 area <area_id>
Parameters
<area_id> - Enter the OSPFv3 area ID. It is a 32-bit number in the form of an IPv4 address that
uniquely identifies the OSPFv3 area in the OSPFv3 domain.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an OSPFv3 area:
DGS-3120-24TC:admin#delete ospfv3 area 2.2.2.2
Command: delete ospfv3 area 2.2.2.2
Success.
DGS-3120-24TC:admin#
71-9 show ospfv3 area
Description
This command is used to display OSPFv3 area configurations or information.
Format
show ospfv3 area {<area_id>}
731