D-Link xStack DGS-3120 Series Cli Reference Manual page 95

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Example
To display the user-defined accounting method list called "shell_acct":
DGS-3120-24TC:admin#show accounting method_list_name shell_acct
Command: show accounting method_list_name shell_acct
Method List Name
----------------
shell_acct
DGS-3120-24TC:admin#
5-39 config accounting service command
Description
This command is used to confiugre the state of the specified accounting service.
Format
config accounting service command {administrator | operator | power_user | user}
[method_list_name <string> | none]
Parameters
administrator - Accounting service for all administrator level commands.
operator - Accounting service for all operator level commands.
power_user - Accounting service for all power-user level commands.
user - Accounting service for all user level commands.
method_list_name - Specify accounting service by the AAA user-defined method list specified
by the "create accounting method_list_name <string 15>" command.
<string> - Enter the name of the method list.
none - Disable AAA command accounting services by specified command level.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable AAA accounting methodlist "shell_acct" to configure accounting shell state:
DGS-3120-24TC:admin#config accounting service command method_list_name
shell_acct
Command: config accounting service command method_list_name shell_acct
Success.
DGS-3120-24TC:admin#
Priority Method Name
-------- ---------------
1 tacacs+
2 radius
Comment
------------------
Built-in Group
Built-in Group
90