D-Link xStack DGS-3120 Series Cli Reference Manual page 511

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin#enable ip_tunnel tn2
Command: enable ip_tunnel tn2
Success.
DGS-3120-24TC:admin#
46-9 disable ip_tunnel
Description
This command is used to disable a single specified IP tunnel or all IP tunnels on the Switch.
Format
disable ip_tunnel {<tunnel_name 12>}
Parameters
<tunnel_name 12> - (Optional) Enter the IP tunnel interface name used here. This name can be
up to 12 characters long.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable an IP tunnel interface (Tunnel name is "tn2"):
DGS-3120-24TC:admin#disable ip_tunnel tn2
Command: disable ip_tunnel tn2
Success.
DGS-3120-24TC:admin#
506