®
xStack
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin# show mac_based_access_control_local vlan default
Command: show mac_based_access_control_local vlan default
MAC Address
-----------------
00-00-00-00-00-01
00-00-00-00-00-04
Total Entries:2
DGS-3120-24TC:admin#
57-17 show mac_based_access_control auth_state
Description
This command is used to display the MAC-based Access Control authentication status.
Format
show mac_based_access_control auth_state ports {<portlist>}
Parameters
ports - Display authentication status by specific port.
<portlist> - (Optional) Enter the list of port used for this configuration here.
If not specified port(s), it will display all of MAC-based Access Control ports authentication status.
Restrictions
None.
Example
To display the MAC-based Access Control authentication status on port 1:1-1:4
DGS-3120-24TC:admin#show mac_based_access_control auth_state ports 1:1-1:4
Command: show mac_based_access_control auth_state ports 1:1-1:4
(P): Port-based
Port MAC Address
---- -------------------- -------------- ---- -------- ------------
Total Authenticating Hosts
Total Authenticated Hosts
Total Blocked Hosts
DGS-3120-24TC:admin#
VID
----
1
1
State
: 0
: 0
: 0
608
VID
Priority Aging Time/
Block Time