D-Link xStack DGS-3120 Series Cli Reference Manual page 756

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
73-5 config fan trap state
Description
This command is used to configure the trap state for fan warning event.
Format
config fan trap state [enable | disable]
Parameters
enable - Enable trap state for warning fan event.
disable - Disable trap state for warning fan event.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the warning fan traps state:
DGS-3120-24TC:admin#config fan trap state enable
Command: config fan trap state enable
Success.
DGS-3120-24TC:admin#
73-6 config power trap state
Description
This command is used to configure the trap state for power warning event.
Format
config power trap state [enable | disable]
Parameters
enable - Enable trap state for warning power event.
disable - Disable trap state for warning power event.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the warning power traps state:
751