D-Link xStack DGS-3120 Series Cli Reference Manual page 787

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Parameters
None.
Restrictions
None.
Example
To display PPPoE circuit ID insertion status:
DGS-3120-24TC:admin#show pppoe circuit_id_insertion
Command: show pppoe circuit_id_insertion
Global PPPoE State: Enabled
DGS-3120-24TC:admin#
79-4 show pppoe circuit_id_insertion ports
Description
This command is used to display Switch's port PPPoE Circuit ID insertion configuration.
Format
show pppoe circuit_id_insertion ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a list of ports to be displayed.
Restrictions
None.
Example
To display port 2-5 PPPoE circuit ID insertion configuration:
DGS-3120-24TC:admin#show pppoe circuit_id_insertion ports 1:2-1:5
Command: show pppoe circuit_id_insertion ports 1:2-1:5
Port State Circuit ID
---- -------- ---------------------------------------------
1:2 Enabled Switch IP
1:3 Enabled Switch IP
1:4 Enabled Switch IP
1:5 Enabled Switch IP
782