D-Link xStack DGS-3120 Series Cli Reference Manual page 498

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Format
config ip standard access_list <list_name 16> [add | delete] <network_address> [deny |
permit]
Parameters
<list_name 16> - Enter the name of the access list.
add - Add the entry to the access list.
delete - Delete the entry from the access list.
<network_address> - Enter the network address as the filter condidtion of the access list.
deny - The network matched will be denied.
permit - The network matched will be permitted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add an entry to the access list:
DGS-3120-24TC:admin#config ip standard access_list list1 add 10.10.10.0/24
permit
Command: config ip standard access_list list1 add 10.10.10.0/24 permit
Success.
DGS-3120-24TC:admin#
45-3 delete ip standard access_list
Description
This command is used to delete an access list identified by the access list name.
Format
delete ip standard access_list [list_name <list_name 16> | all]
Parameters
list_name - Specify the name of the access list.
<list_name 16> - Enter the name of the access list.
all - specify to remove all access list.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
493