D-Link xStack DGS-3120 Series Cli Reference Manual page 644

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Restrictions
None.
Example
To show an MLD snooping group when MLD v2 is supported:
The first item means that for ports 1-2, the data from the 2001::1/FE1E::1 will be forwarded.
The second item means that for port 3, the data from the 2002::2/FE1E::1 must not be forwarded.
The third item means that for ports 4-5, the data from FE1E::2 will be forwarded, MLD v1 group
doesn't care about the source address.
The fourth item is a data-driven learned entry. The member port list is empty. The multicast
packets will be forwarded to the router ports. If the router port list is empty, the packet will be
dropped.
DGS-3120-24TC:admin# show mld_snooping group
Command: show mld_snooping group
Source/Group
VLAN Name/VID
Member Ports
UP Time
Expiry Time
Filter Mode
Source/Group
VLAN Name/VID:
Member Ports
UP Time
Expiry Time
Filter Mode
Source/Group
VLAN Name/VID
Member Ports
UP Time
Expiry Time
Filter Mode
Source/Group
VLAN Name/VID
Reports
Member Ports
Router Ports
UP Time
Expiry Time
Filter Mode
Total Entries : 4
DGS-3120-24TC:admin#
: 2001::1/FE1E::1
: default/1
: 1-2
: 26
: 258
: INCLUDE
: 2002::2/FE1E::1
: default/1
: 3
: 29
: 247
: EXCLUDE
: NULL/FE1E::2
: default/1
: 4-5
: 40
: 205
: EXCLUDE
: NULL/FF1E::5
: default/1
: 0
:
: 24
: 100
: 200
: EXCLUDE
639