D-Link xStack DGS-3120 Series Cli Reference Manual page 649

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Format
config mld_snooping static_group [vlan <vlan_name 32> | vlanid <vlanid_list>] <ipv6addr>
[add | delete] <portlist>
Parameters
vlan - Specify the name of the VLAN on which the static group resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - Specify the ID of the VLAN on which the static group resides.
<vlanid_list> - Enter the VLAN ID list here.
<ipv6addr> - Specify the multicast group IPv6 address.
add - Specify to add the member ports.
delete - Specify to delete the member ports.
<portlist> - Specify a range of ports to be configured.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To unset port range 9-10 from MLD snooping static member ports for group FF1E::1 on default
VLAN:
DGS-3120-24TC:admin# config mld_snooping static_group vlan default FF1E::1
delete 2:9-2:10
Command: config mld_snooping static_group vlan default FF1E::1 delete 2:9-2:10
Success.
DGS-3120-24TC:admin#
63-14 show mld_snooping static_group
Description
This command used to display the MLD snooping multicast group static members.
Format
show mld_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipv6addr>}
Parameters
vlan - (Optional) Specify the name of the VLAN on which the static group resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - (Optional) Specify the ID of the VLAN on which the static group resides.
<vlanid_list> - Enter the VLAN ID list here.
<ipv6addr> - (Optional) Specify the multicast group IPv6 address.
644