Show Mac Address-Table Multicast - Cisco Catalyst 3550 Command Reference Manual

Multilayer switch
Hide thumbs Also See for Catalyst 3550:
Table of Contents

Advertisement

Chapter 2 Cisco IOS Commands

show mac address-table multicast

Use the show mac address-table multicast user EXEC command to display the Layer 2 multicast
entries for all VLANs. Use the command in privileged EXEC mode to display specific multicast entries.
Beginning with Cisco IOS Release 12.1(11)EA1, the show mac address-table multicast command
Note
replaces the show mac-address-table multicast command (with the hyphen).
Syntax Description
count
igmp-snooping
user
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.1(4)EA1
12.1(11)EA1
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show mac address-table multicast command. It shows how to
display all multicast entries for the switch.
Switch> show mac address-table multicast
Vlan
----
1
78-11195-09
show mac address-table multicast [count] | igmp-snooping [count] | user [count] | vlan [count]
| [vlan-id [count] | igmp-snooping [count] | user [count]] [ | {begin | exclude | include}
expression]
(Optional) Display the total number of entries for the specified command
options instead of the actual entries.
(Optional) Display entries learned through Internet Group Management
Protocol (IGMP) snooping.
(Optional) Display only the user-configured multicast entries.
(Optional) Display addresses for a specific VLAN. The range is 1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
The show mac-address-table multicast command was replaced by the show
mac address-table multicast command.
Mac Address
Type
-----------
----
0100.5e00.0128
IGMP
Ports
-----
Gi0/1
Catalyst 3550 Multilayer Switch Command Reference
show mac address-table multicast
2-317

Advertisement

Table of Contents
loading

Table of Contents