Vlan Database - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

vlan database

To enter VLAN configuration mode, use the vlan database command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
Usage Guidelines
From VLAN configuration mode, you can access the VLAN database editing buffer manipulation
commands, including:
•
•
•
•
•
•
•
•
Examples This example shows how to enter VLAN configuration mode:
Switch# vlan database
Switch(vlan)#
This example shows how to exit VLAN configuration mode without applying changes after you are in
VLAN configuration mode:
Switch(vlan)# abort
Aborting....
Switch#
OL-27596 -01
vlan database
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
abort—Exits mode without applying the changes.
apply—Applies the current changes and bumps the revision number.
exit—Applies the changes, bumps the revision number, and exits VLAN configuration mode.
no—Negates a command or sets its defaults; valid values are vlan and vtp.
reset—Abandons the current changes and rereads the current database.
show—Displays the database information.
vlan—Accesses the subcommands to add, delete, or modify values that are associated with a single
VLAN. For information about the vlan subcommands, see the
command.
vtp—Accesses the subcommands to perform VTP administrative functions. For information about
the vtp subcommands, see the
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
vtp client command.
vlan database
vlan (VLAN Database mode)
2-1115