Show Platform Ip Multicast - Cisco Catalyst 3560-X Command Reference Manual
Hide thumbs
Also See for Catalyst 3560-X:
- Software configuration manual (1538 pages) ,
- Command reference manual (1244 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
show platform ip multicast
show platform ip multicast
Note
Syntax Description
Command Modes
Command History
Usage Guidelines
Catalyst 3750-X and 3560-X Switch Command Reference
C-12
Downloaded from
www.Manualslib.com
Use the show platform ip multicast privileged EXEC command to display platform-dependent IP
multicast tables and other information.
show platform ip multicast {acl-full-info | counters | groups | hardware [detail] | interfaces |
locks | mdfs-routes | mroute-retry | retry | trace} [ | {begin | exclude | include} expression]
This command is not supported on switches running the LAN base feature set.
acl-full-info
Display IP multicast routing access-control list (ACL) information, in
particular the number of outgoing VLANs for which router ACLs at the
output cannot be applied in hardware.
counters
Display IP multicast counters and statistics.
groups
Display IP multicast routes per group.
hardware [detail]
Display IP multicast routes loaded into hardware. The optional detail
keyword is used to show port members in the destination index and route
index.
interfaces
Display IP multicast interfaces.
locks
Display IP multicast destination-index locks.
mdfs-routes
Display multicast distributed fast switching (MDFS) IP multicast routes.
mroute-retry
Display the IP multicast route retry queue.
retry
Display the IP multicast routes in the retry queue.
trace
Display the IP multicast trace buffer.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Privileged EXEC
Release
Modification
12.2(53)SE2
This command was introduced.
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
manuals search engine
Appendix C
Catalyst 3750-X and 3560-X Show Platform Commands
OL-21522-02
Advertisement
Table of Contents
