Section 2. Details on Settings
This section describes connection configurations and how to make the settings for the
TM-U330x Series printers.
2.1. References of Firmware Versions
Refer to the release notes (Relnote.txt).
2.2. Port Information
1) Port information when serial port is used
The port information that can be set with the SetupPOS utility is as follows.
Baud rate [bps]
Bit length [bit]
Parity
Stop bit [bit]
Handshake
Output buffer length [byte]
Output interval time [ms]
The default settings are as shown in the following table.
Baud rate [bps]
Bit length [bit]
Parity
Stop bit [bit]
Handshake
Output buffer length [byte]
Output interval time [ms]
2) Port information when using parallel port
Not applicable
3) Port information when using USB port
Not applicable
Item
Item
1024
2
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-U330x)
Version 3.00 Feb. 2019
Setting range
1200,2400,4800,9600,19200,38400,57600,1
15200
8
NONE, ODD, EVEN
1
DTR/DSR
32 to 1024
0 to 9999
Setting range
115200
8
NONE
1
DTR/DSR
2500