Section 2. Details On Settings; References Of Firmware Versions; Settings Of Dip Switches; Port Information - Epson TM-J7200 Series Development Manual

Section 2. Details on Settings

This section describes connection configurations and how to make the settings for the
TM-J7x00 printers.

2.1 References of Firmware Versions

Refer to the release notes (Relnote.txt).

2.2 Settings of DIP Switches

Not applicable

2.3 Port Information

1) Port information when using USB port
Not applicable
2) Port information when using Ethernet port
The port information that can be set with the SetupPOS utility is as follows.
Output buffer length [byte]
Output interval time [ms]
The default settings are as shown in the following table.
Output buffer length [byte]
Output interval time [ms]
Item
Item
2
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-J7200/ TM-J7700)
Version 3.00 Feb. 2019
Setting range
32 to 1024
0 to 9999
Setting range
1024
2500