Service-Call Error; Engine Related Error - Epson EPL-N2700 Service Manual

EPSON EPL-N2700 / N2750
none of the paper source has paper in it, the message "Manual
Feed ssss ttt" is indicated again. Even though the fed paper size
does not match ttt, "Check Paper Size" is not indicated.
Remove Output Paper (error)
o
When the multibin mode is changed from the previous one, paper
remains in the multibin unit.
<Remedy>
Remove all paper in the multibin unit, and the error is automatically
cleared.
Can't Print Duplex (error)
o
Duplex print is not available due to restricted matter on the duplex
print.
<Remedy>
Press the Continue button, and the printer starts single printing. If
"Auto Cont" in the Config menu is activated, the printer starts single
printing after specified period of time. In case the error relates to the
paper source device, the printer may starts duplex printing when the
device's condition changes and the error is cleared.
Invalid option (error)
o
The option currently installed is not supported by the printer.
<Remedy>
Turn the printer off and remove the corresponding option.
Check Paper Type (warning)
o
When "Paper Source" is set to "Auto" and paper type is specified,
none of the paper sources holds paper whose size and type both
meet the selected paper size and type. So the printer loads paper
from the paper source which holds the paper that does not match
the selected paper type but the size only. In case the paper source
set for the paper of the selected paper size and type is empty,
"Paper Out" error occurs instead of this warning.
Troubleshooting
Outbin Select Error
o
The output device used is other than selected one because the
selected device is restricted.

3.1.2 Service-call Error

The service-call errors fall into two categories; engine related and
controller related, as described in the next sections.

3.1.2.1 Engine Related Error

The following table lists the engine related errors which can occur in this
printer.
Table 3-2. Engine Related Error List for EPL-N2700
Error Code
E0004
E0005
E0006
E0008
E0014
E0015
E0030
E0032
E0034
E0041
E0046
E0047
Overview
Description
Main motor error
Fan motor error
Polygon motor error
Engine EEPROM error
Error in communications with engine
Error in communication with option
Fuser error (time-out)
Fuser error (overheat)
Fuser error (low temperature error)
IU motor error
HSYNC detection error
IU fuse blown error
Revision B
92