Toner Low; Warming Up; Write Error Dimm A; Writing Dimm A - Epson EPL-N1600 Reference Manual

Service Req. eXXX
A controller error or a print engine error has been detected. Write
down the error number listed on the display and turn off the
printer. Wait at least 10 seconds and then turn it back on. If this
error still occurs, turn off the printer, unplug the power cord, and
contact a qualified service person.
Standby
The printer is turned on, but is in energy-saving mode.

Toner Low

The printer is almost out of toner. You should prepare a new
cartridge; the toner will be out soon.

Warming Up

The printer is warming up.

Write Error DIMM A

This message indicates an internal error in the printer. Reset the
printer. If this error persists, consult your EPSON dealer.

Writing DIMM A

The printer is writing the settings to ROM module A.
6-28
Troubleshooting and Maintenance