Controller Unit Specifications; Controller Basic Specifications - Epson AcuLaser C4000 Service Manual

EPSON AcuLaser C4000/C4100/C3000

1.13 Controller Unit Specifications

1.13.1 Controller Basic Specifications

CPU
CPU : 64-bit RISC PowerPC 750CX 400 MHz
ASIC : VIP2
CDMC (color conversion, color compression,
color adjustment)
RAM
SDRAM : 64-bit width DIMM (168 pins, 3.3V, PC100)
2 slots (the standard RAM must be installed to
slot-1 and SDRAM DIMM must be installed to
slot-0)
Standard : 64 MB
Optional RAM : 32 MB, 64 MB, 128 MB, 256 MB, 512 MB
A maximum of 1024 MB for both two slots by
installing 512MB
NOTE: The standard 64 MB RAM must be removed
ROM
32 - bit width
Program : 4 MB (Flash ROM DIMM)
Fonts : 4 MB
Expansion ROM : 1 slot (ROM DIMM slot) (can be installed and
removed only when turning off the printer)
A slot : PS3, font ROM module
Product Descriptions
HOST INTERFACE
Standard
Option
PRINTER SETTINGS
Printer Settings
Storage cell
CONTROL PANEL
20-digit LCD, 3 LEDs, 6 buttons
HDD
1 (optional) IDE type
INSTALLATION METHOD
The slide drip method that inserts from the back of the main unit
Controller Unit Specifications
Parallel 1ch Bi-directional compatible with IEEE 1284
standard, B-type connector
Compatibility, Nibble, ECP
Ethernet 100 Base-TX/10 Base-T
USB 1.1
: Type-B1 slot (Level 3 compatible)
: Panel settings, EJL, PJL, HTTP, SNMP and
ENPC
: EEPROM 32 Kbytes
Revision F
1-27