Controller Specifications - Epson AcuLaser C9200N Service Manual

EPSON AcuLaser C9200N

1.1.4 Controller Specifications

BASIC SPECIFICATIONS
CPU 32bit RISC CPU
Enhanced Technology NPGI, PGI, CRIT, RIT
RAM Standard (on-board) 256 MB
Maximum 768 MB
Expansion Type DDR333 CL=2.5
(128 MB, 256 MB, 512 MB)
Numbers of slot 1 slot
ROM Type 32-bit width (3.3V)
Program 32 MB (DIMM)
Font Included in the program
Expansion ROM ROM for Adobe PS3 as a standard
EEPROM Serial type 512 kbit
Control panel 22 digits x 5 lines LCD, three LEDs and seven buttons
Printer language ESC/Page-Color, ESC/Page, FX, ESCP2, I239X,
PCL5c, PCL6, Adobe PostScript3 and PDF1.6
Auxiliary software
PRODUCT DESCRIPTION
Configuration Status Sheet
Supplies Status Sheet
Usage History Sheet
Reserve Job List
Form Overlay List
Network Status Sheet
EpsonNet Config (Web)
USB Ext I/F Status Sheet (only when connected to
D4 compliant USB devices)
AUX Status Sheet (only when Type-B level 3 is
installed)
PS3 Status Sheet
PS3 Font List
ROM A Information (only when optional DIMM
is installed)
Product Specifications
EXTERNAL INTERFACES
Standard USB interface
Parallel interface
Ethernet interface
Option Type-B interface
USB 2.0HS Device Interface
Parallel Interface
USB 2.0HS Host Interface
Figure 1-7. External Interfaces
Revision D
USB 2.0HS Device Interface
Service connector (USB 2.0HS Host Interface)
IEEE1284 compliant
100BaseTX/10BaseT
---
Type-B Interface
Ethernet Interface
Confidential
21