Waste Toner Box Full Detection Control - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500

2.7.7.3 WASTE TONER BOX Full Detection Control

Determines when the WASTE TONER BOX is full of toner by the chart on the
next page (see Figure 2-59, "Waste Toner Box Full Detection Control".) to
prevent misdetection of the WASTE TONER SENSOR.
NOTE: Counter A and Counter B described below count the total number
of prints. Counter C counts dispense time for colors Y, M, C, and
Bk.
Table 2-6. WASTE TONER BOX Full Detection Control
Paper size
(paper length in transport
direction)
Paper size in excess of 219mm
Paper size less than 219mm
NOTE: The WASTE TONER SENSOR detects when the WASTE TONER
BOX is full of toner. The WASTE TONER BOX full warning is given
while Counters A/C are counting.
Operating Principles
YMCBk mode B/W mode
8 count 2 count
4 count 1 count
Revision C
2-57